Electric Vehicles: July 2009 Archives

My little Piaggio-EV is back up and running. I made the following mods:

  • My replacement HV-110 is now installed in an external plexiglass box with (much) better airflow and forced as well as passive air cooling. The forced cooling is on full all the time rather than the temperature variable fan that I used to have.
  • Extra caps (470 uF x 6) soldered in parallel with input leads
  • (Slightly) beefier wiring used -- 8 gauge rather than 12 ga
  • 75 amp Andersen PowerPoles used instead of 30A
  • Wiring shortened a bit
  • Thermometer probe directly on caps to monitor heat

So far, it seemed ok. After my ride to work this morning, the caps heated up a bit -- from 17°C ambient at the beginning to 37°C ambient at the end of the 5 kilometer ride. I'm working on getting even more cooling in there.

6 amps used. 30 watts/kilometer average energy expenditure.

About this Archive

This page is a archive of entries in the Electric Vehicles category from July 2009.

Electric Vehicles: April 2009 is the previous archive.

Electric Vehicles: August 2009 is the next archive.

Find recent content on the main index or look in the archives to find all content.